View ALT6701_4965009.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ALT6701 help4 tm umts2100 (band 1) lte, wcdma, cdma multimode pam data sheet - rev 2.8 m45 package 10 pin 3 mm x 3 mm x 1 mm surface mount module figure 1: block diagram features ? cdma/evdo, wcdma/hspa and lte compliant ? 4th generation help tm technology ? high effciency (r99 waveform): ? 41 % @ p out = +28.4 dbm ? 31 % @ p out = +17 dbm ? 21 % @ p out = +13.5 dbm ? 26 % @ p out = +9 dbm ? 13 % @ p out = +3.5 dbm ? low quiescent current: 2 ma ? low leakage current in shutdown mode: <5 a ? internal voltage regulator ? integrated daisy chainable directional coupler with cpl in and cpl out port. ? internal dc blocks on in/out rf ports ? optimized for a 50 ? system ? 1.8 v control logic ? rohs compliant package, 260 o c msl-3 applications ? band 1 wcdma/hspa wireless devices ? band 1 lte wireless devices ? band class 6 cdma/evdo wireless devices product description the ALT6701 help4 tm pa is a 4th generation help tm product for lte and wcdma devices operating in umts2100 (band 1) and for cdma devices operating in band class 6. this pa incorporates anadigics help4 tm technology to deliver exceptional effciency at low power levels and low quiescent current without the need for external voltage regulators or converters. the device is manufactured using advanced ingap- plus tm hbt technology offering state-of-the-art reliability, temperature stability, and ruggedness. three selectable bias modes that optimize effciency for different output power levels and a shutdown mode with low leakage current increase handset talk and standby time. a daisy chainable directional coupler is integrated in the module, thus eliminating the need of an external coupler. the self-contained 3 mm x 3 mm x 1 mm surface mount package incorporates matching networks optimized for output power, effciency, and linearity in a 50 ? system. al t6701 1 2 3 4 5 10 9 8 7 v bat t rf in v mode 2 v mode 1 v en cp l ou t gn d cp l in rf ou t v cc bias control voltage regulation cp l gnd at slug (pad ) 8 7 6 5 4 3 2 1 10 03/2012
2 figure 2: pinout (x-ray top view) table 1: pin description v bat t rf in v mode 2 v mode 1 v en 1 2 3 4 56 7 8 9 10 cp l ou t gn d cp l in rf ou t v cc 1 2 3 4 56 7 8 9 10 pin name description 1 v batt battery voltage 2 rf in rf input 3 v mode2 mode control voltage 2 4 v mode1 mode control voltage 1 5 v en pa enable voltage 6 cpl out coupler output 7 gnd ground 8 cpl in coupler input 9 rf out rf output 10 v cc supply voltage data sheet - rev 2.8 03/2012 ALT6701
3 electrical characteristics table 2: absolute minimum and maximum ratings stresses in excess of the absolute ratings may cause permanent damage. functional operation is not implied under these conditions. exposure to absolute ratings for extended periods of time may adversely affect reliability. table 3: operating ranges the device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defned in the electrical specifcations. notes: (1) for operation at 3.1 v, p out is derated by 0.8 db. (2) lte waveform: up to 20 mhz, 18 rbs, qpsk. (3) for operation at +105 c, p out is derated by 1.0 db. parameter min max unit supply voltage (v cc ) 0 +5 v battery voltage (v batt ) 0 +6 v control voltages (v mode1 , v mode2 , v en ) 0 +3.5 v rf input power (p in ) - +10 dbm storage temperature (t stg ) -40 +150 c pa ra me te r mi n ty p ma x unit co mments op er at in g fr eque nc y (f )1 920 -1 980 mh z su pply vo lt age (v cc )+ 3. 1+ 3. 4+ 4. 35 vp ou t < +2 8. 4 db m en able vo lt age (v en ) +1 .3 5 0 +1 .8 - +3 .1 +0 .5 v pa "o n" pa "s hut dow n" mo de co nt ro l vo lt age (v mo de 1 ,v mo de 2 ) +1 .3 5 0 +1 .8 - +3 .1 +0 .5 v low bi as m ode hi gh bi as m ode wc dm a / um ts ou tp ut po we r r9 9, hp m hs pa (mp r= 0) , hp m lt e (2 ) r9 9, mp m lt e & hs pa (mp r= 0) , mp m (2 ) r9 9, lp m lt e & hs pa (mp r= 0) , lp m (2 ) 27. 6 26. 6 26. 2 - - 8. 2 7. 2 28. 4 27. 4 27. 0 17 .0 16 .0 9. 0 8. 0 - - - - - - - db m 3g pp ts 34 .1 21 -1 , re l 8 t abl e c. 11 .1 .3 fo r wc dm a su bt est 1 ts 36. 101 re l 8 fo r lt e cdm a ou tp ut po we r hp m mp m lp m 26. 9 - 7. 2 27. 7 16 .0 8. 0 - - - db mc dm a 2000, rc -1 ca se te mp er at ur e (t c )- 40 -+ 90 c (1 , 3) (1 , 3) data sheet - rev 2.8 03/2012 ALT6701
4 table 4: electrical specifcations - lte operation (rb = 12, start = 0, qpsk) (t c = +25 c, v batt = v cc = +3.4 v, v en = +1.8 v, 50 ? system) notes: (1) aclr and effciency measured at 1950 mhz. parameter min typ max unit comments p out v mode1 v mode2 dl 27 10 22 db p 287 = +27 dbm p 287 p p 287 = +8 dbm aclr e-utra at 6 - - - -40 -40 dbc p 287 = +27 dbm p 287 p p 287 = +8 dbm aclr utra at 6 - - - -40 -40 -41 dbc p 287 = +27 dbm p 287 p p 287 = +8 dbm aclr utra at 6 6 - - - -40 -40 -40 dbc p 287 = +27 dbm p 287 p p 287 = +8 dbm rhuh(ilh 24 18 28 - - - p 287 = +27 dbm p 287 p p 287 = +8 dbm 4lhhwuuhw,t rld0rh - 2 ma wur cc pin 1b+(pllr - -42 pn+ p 287 27 dbm 0rhrwuruuhw - 0.08 ma wur 02( sl 02( (dehuuhw - 0.04 0.1 ma wur en sl en 77 uuhw - 0.8 ma wur batt sl 02( hdndhuuhw - 10 ma batt cc en 02( 1rlhrhu - - - - -144 - - p+ 0+wr0+ d ism band 0+ +duprl ir irir - - dbc p 287 +27 dbm rsl)dwru - 20 - db luhwllw - 20 - db dldl,huwlrr - - db sulr2wswhh dsulrrwsw - - dbc p 287 +27 dbm ,edrd 2wriedrd sslhrhudrshudwlrlwlr rdplpdwwuhlwr shupdhwhuddwlrruidluh - - sslhrhuirshudwludh data sheet - rev 2.8 03/2012 ALT6701
5 table 5: electrical specifcations - wcdma operation (r99 waveform) (t c = +25 c, v batt = v cc = +3.4 v, v en = +1.8 v, 50 ? system) parameter min typ max unit comments p out v mode1 v mode2 gain 24.5 16 7.5 27 19 10 29 22 12.5 db p out = +28.4 dbm p out = +17 dbm p out = +9 dbm 0 v 1.8 v 1.8 v 0 v 0 v 1.8 v aclr1 at 5 mhz offset (1) - - - -41 -41 -41 -37.5 -37.5 -37.5 dbc p out = +28.4 dbm p out = +17 dbm p out = +9 dbm 0 v 1.8 v 1.8 v 0 v 0 v 1.8 v aclr2 at 10 mhz offset - - - -53 -56 -60 -48 -48 -48 dbc p out = +28.4 dbm p out = +17 dbm p out = +9 dbm 0 v 1.8 v 1.8 v 0 v 0 v 1.8 v power-added efficiency (1) 37 27 - 20 - 41 31 21 26 13 - - - - - % p out = +28.4 dbm p out = +17 dbm p out = +13.5 dbm p out = +9 dbm p out = +3.5 dbm 0 v 1.8 v 1.8 v 1.8 v 1.8 v 0 v 0 v 0 v 1.8 v 1.8 v spurious output level (all spurious outputs) - - -70 dbc p out < +28.4 dbm in-band load vswr < 5:1 out-of-band load vswr < 10:1 applies over all operating conditions load mismatch stress with no permanent degradation or failure 8:1 - - vswr applies over full operating range data sheet - rev 2.8 03/2012 ALT6701
6 table 6: electrical specifcations - cdma operation (cdma 2000, rc-1) (t c = +25 c, v batt = v cc = +3.4 v, v enable = +1.8 v, 50 ? system) pa ra me te r mi n ty p ma x unit co mments p ou t v mo de 1 v mo de 2 ga in 24 .5 16 7. 5 27 19 10 29 22 13 db p ou t = +2 7. 7 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v ad ja ce nt ch a nne l po we r at 1. 25 mh z o ffs et pr im ar y ch an ne l bw = 1. 23 mh z ad ja ce nt ch a nne l bw = 30 kh z - - - -5 0 -5 4 -5 6 -4 6. 5 -4 6. 5 -4 6. 5 db c p ou t = +2 7. 7 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v ad ja ce nt ch a nne l po we r at 1. 98 mh z offset pr im ar y ch an ne l bw = 1. 23 mh z ad ja ce nt ch a nne l bw = 30 kh z - - - -5 6 <- 60 <- 60 -5 3 -5 3 -5 3 db c p ou t = +2 7. 7 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v po we r-ad ded e ffi ci en cy (1 ) 34 25 18 38 29 22 - - - % p ou t = +2 7. 7 db m p ou t = +1 6 db m p ou t = +8 db m 0 v 1. 8 v 1. 8 v 0 v 0 v 1. 8 v sp ur io us ou tp ut lev el (a ll sp ur io us ou tp ut s) -- -7 0d bc p ou t < +2 7. 7 db m in -b an d vsw r <5 :1 ou t-of-b an d vswr < 10 :1 ap pl ie s to a ll oper at in g co nd it io ns load mi sm at ch st re ss wi th no perm an en t degr adat io n or fa il ur e 8: 1- -v sw ra ppli es ov er fu ll opera ti ng ra ng e data sheet - rev 2.8 03/2012 ALT6701
7 performance data plots: (lte operation at 1950 mhz and 50 v system) figure 4: wcdma gain (db) over temperature (v batt = v cc = 3.4 v) figure 5: lte gain (db) over voltage (t c = 25 8c) figure 6: lte pae (%) over temperature (t c = 25 8c) figure 7: lte pae (%) over voltage (t c = 25 8c) figure 8: lte aclr1 (dbc) over temperature (v batt = v cc = 3.4 v) figure 9: lte aclr1 (dbc) over voltage (t c = 25 8c) 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 gain (db) pout (dbm) figure 4: wcdma gain (db) over temperature (vbatt=vcc=3.4v) - 30c 3.4vcc 25c 3.4vcc 90c 3.4vcc 0 5 10 15 20 25 30 0 5 10 15 20 25 30 gain (db) pout (dbm) figure 5: lte gain (db) over voltage (tc=25c ) 25c 3.2vcc 25c 3.4vcc 25c 4.2vcc 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 efficiency (%) pout (dbm) figure 6: lte pae (%) over temperature (vbatt=vcc=3.4v) - 30 3.4cc 25c 3.4vcc 90c 3.4vcc 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 efficiency pout (dbm) figure 7: lte pae (%) over voltage (tc=25c) 25c 3.2vcc 25c 3.4vcc 25c 4.2vcc - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 0 5 10 15 20 25 30 aclr1 (5mhz dbc) pout (dbm) figure 8: lte acrl1 (dbc) over temperature (vbatt=vcc=3.4v) - 30c 3.4vcc 25c 3.4vcc 90c 3.4vcc - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 0 5 10 15 20 25 30 aclr1 (5mhz dbc) pout (dbm) figure 9: lte aclr1 (dbc) over voltage (tc=25c) 25c 3.2vcc 25c 3.4vcc 25c 4.2vcc data sheet - rev 2.8 03/2012 ALT6701
8 application information to ensure proper performance, refer to all related application notes on the anadigics web site: http://www.anadigics.com shutdown mode the power amplifer may be placed in a shutdown mode by applying logic low levels (see operating ranges table) to the v en , v mode1 and v mode2 voltages. bias modes the power amplifer may be placed in either low, medium or high bias modes by applying the appropriate logic level (see operating ranges table) table 7: bias control to the v mode pins. the bias control table below lists the recommended modes of operation for various applications. three operating modes are recommended to optimize current consumption. high bias/high power operating mode is for p out levels > 16 dbm. at ~17dbm - 6 dbm, the pa could be switched to medium power mode. for p out levels < ~8 dbm, the pa could be switched to low power mode for extremely low current consumption. figure 10: evaluation board schematic c3 33 pf c4 2.2 f ceramic rf in 1 6 7 10 8 5 4 3 v batt v mode1 rf out rf in gnd v cc v en cpl out v cc c1 0.1 f v batt v mode 1 v en cpl in v mode 2 29 v mode2 c5 2.2 f c2 0.1 f gnd at slug cpl in cpl out rf out ap pl ic at ion p ou t l evel s bi as mo de v en v mo de 1 v mo de 2 v cc v ba tt low powe r (l ow bi as m ode) < + 8 db ml ow +1 .8 v+ 1. 8 v+ 1. 8 v3 .1 - 4. 35 v> 3. 1 v m ed powe r (medi um bi as m ode) > 6 db m < 17 db m low+ 1. 8 v+ 1. 8 v0 v3 .1 - 4. 35 v> 3. 1 v hi gh powe r (h ig h bi as m ode) > + 16 db mh ig h+ 1. 8 v0 v0 v3 .1 - 4. 35 v> 3. 1 v s hut down -s hut dow n0 v0 v0 v3 .1 - 4. 35 v> 3. 1 v data sheet - rev 2.8 03/2012 ALT6701
9 figure 11: m45 package outline - 10 pin 3 mm x 3 mm x 1 mm surface mount module figure 12: branding specifcation - m45 package package outline 6701r llllnn yy wwc c pin 1 identifier co untr y co de(c c) pa rt number date co de (y yw w) lo t number data sheet - rev 2.8 03/2012 ALT6701
10 pcb and stencil design guideline figure 13: recommended pcb layout information data sheet - rev 2.8 03/2012 ALT6701
11 component packaging figure 14: carrier tape pin 1 figure 15: reel data sheet - rev 2.8 03/2012 ALT6701
data sheet - rev 2.8 03/2012 ordering information o rder num be r te mp er at ure ra ng e pa cka ge descri pt ion co mp on ent pa cka gin g al t6 701r m4 5q 7- 40 o c to +9 0 o c ro hs co mp li an t 10 pi n 3 mm x 3 mm x 1 mm su rf ace mo unt mo du le ta pe an d r eel , 2500 pi eces per r eel al t6 701r m4 5p 9- 40 o c to +9 0 o c ro hs co mp li an t 10 pi n 3 mm x 3 mm x 1 mm su rf ace mo unt mo du le pa rt ia l ta pe an d re el warning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. import ant notice anadigics, inc. 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. ALT6701

▲Up To Search▲

Price & Availability of ALT6701

	To Download ALT6701 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .